In a prior article we focused on the key items to look out for when buying LED Strip Lights for the first time. Now we will get you through the next phase; installation. Installing your LED Strips may be anything from quite simple to very difficult, but ultimately it all depends about what final result you are trying to achieve along with your lighting system. For instance, introducing a 1 metre strip of LED lighting into your kitchen cabinet might be a much more easy than using 20 metres of RGB LED Strip Lights to outfit a team and run this on DMX Control. Whatever you do there are always a few universal items to look out for and this informative article will get you through a few of them.

We shall start with the LED Tape itself. This is made up of long bit of high impact, flexible circuit board with surface mounted devices, or SMDs, positioned along its length. There are always a few different items to consider here including, LEDs per metre, LED chip size, strip light colour and length. Strip Lights can be purchased in two LED per metre varieties, 30 LED per metre and 60 LED per metre. As suggested by the name the latter has twice as many LEDs and is brighter compared to former mean well led driver. They are created to be found in a lighting context where they’re forced to contend with background illumination. So for example if you intend to utilize them in a daylight setting, such as a shop street display, or add them to a space that already has general illumination and still want them to be seen, you need to go for 60 LED per metre as their sharper light output makes them ideal for these purposes. Aside from this a 30 LED per metre strip will have a way to handle most other lighting arrangements, such as club setups, or elsewhere they don’t need certainly to contend with background lighting.

Whenever you consider the specifications of strip lighting you will usually notice some four numbers that to most people mightn’t mean a lot. These actually make reference to the size of the patient LEDs on the strips. Typically you may find chip sizes of either 5050 (5mm by 5mm) or 3528 (3.5mm by 2.8mm). The main element difference between both of these kinds of chip size may be the consistency of light they produce. Smaller LEDs can provide an even more jagged and inconsistent effect, while larger LEDs provides an even more even spread of light.

Another decision to make is exactly what colour strip light you intend to buy. They are usually available in three main colour varieties, including warm and cool white and interchangeable RGB. The former two are for adding stylish ambient lighting to commercial and domestic settings while avoiding being too garish with the end result. They can be utilized to aesthetically to improve the look of a space by the addition of layered or accent lighting, or they can add functionality to kitchens, bathrooms or offices where they can be utilized as task lighting to assist work. RGB LED is really a direct replacement for old fashioned disco lighting and offers tens and thousands of programmable effects. Typically they will run directly from a remote control which works along with a red eye sensor attached involving the strip light and transformer. However, DMX Control is also an option. This can be a form of advanced effects programming that uses an industry standard signal to regulate the brightness, colour and frequency of the lights.

Probably the most obvious consideration to make is the actual amount of strip lighting that you require. This depends upon the nature of one’s setup and how complex your intentions are. Usually most lighting arrangements can be achieved with a single strip. Strip Lights can be purchased in 5 metre and 10 metre reels as standard, but longer or shorter bespoke lengths may be ordered so call your provider to locate out. Lengthening or shortening strip lighting can be done all on your own as well. To shorten a reel light can be done by simply cutting the strip at one of its cutting points spaced approximately 5cm apart along along the light. To install two pieces of strip together, and thereby increase along the light, you will require a soldering iron and some two core wire. Simply solder these wires for their respective plus and minus solder points by the end of the strip light where the cut has been made and do exactly the same on the other strip to perform the connection. This technique can be utilized to accomplish a bit of extra length, particularly when trailing them around a sizable corner.

This article has given you a few of the main specifications associated with LED Strip Lighting and how to make certain you obtain precisely the right light you desire for your purposes. Consider additional articles on how best to be sure you meet the ability requirements of one’s lighting system.

Leave a Reply

Your email address will not be published.